Loading ...
Loading ...
Loading ...
5
www.spirittness.com
unless they have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Keep children under the age of 13 away from this
machine.
• ASTM F2115-05 Specications
6.1.2.11 The recommended minimum clearance
required around each treadmill for access to,
passage around, and emergency dismount shall be
stated. The minimum dimensions are to be: 0.5 m
(19.7 in.) on each side of the treadmill, and 1 m
(39 in.) behind the machine.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT ELECTRICAL
INSTRUCTIONS
WARNING
NEVER use a ground fault circuit interrupt (GFCI)
wall outlet with this treadmill. As with any appliance
with a large motor, the GFCI will trip often. Route
the power cord away from any moving part of the
treadmill including the elevation mechanism and
transport wheels. NEVER remove any cover without
rst disconnecting AC power. If voltage varies by
ten percent (10%) or more, the performance of your
treadmill may be affected. Such conditions are not
covered under your warranty. If you suspect the
voltage is low, contact your local power company
or a licensed electrician for proper testing.
NEVER expose this treadmill to rain or moisture.
This product is NOT designed for use outdoors,
near a pool or spa, or in any other high
humidity environment. The operating temperature
specication is 40 to 120 degrees Fahrenheit, and
humidity is 95% non-condensing (no water drops
forming on surfaces).
Circuit Breakers: Some circuit breakers used in
homes are not rated for high inrush currents that
can occur when a treadmill is rst turned on or
even during use. If your treadmill is tripping the
house circuit breaker (even though it is the proper
current rating) but the circuit breaker on the treadmill
itself does not trip, you will need to replace the
home breaker with a high inrush type. This is not
a warranty defect. This is a condition we as a
manufacture have no ability to control. This part is
Loading ...
Loading ...
Loading ...