Loading ...
Loading ...
Loading ...
41
www.spirittness.com
ENGINEERING MODE MENU
The console has built in maintenance/diagnostic software. The software will allow you to change the
console settings from English to Metric and turn off the beeping of the speaker when a button is pressed
for example. To enter the Engineering Mode Menu press and hold down the Start, Stop and Enter buttons,
then insert the safety button. Keep holding the buttons down for about 5 seconds until the Message Center
displays Engineering Mode Menu. Press the Enter button to access the menu below:
1. Key Test (Will allow you to test all the buttons to make sure they are functioning)
2. Display Test ( Tests all the display functions)
3. Security (Allows the keypad to be locked to prevent unauthorized use)
4. Functions (Press Enter to access settings and Up arrow to scroll)
a. Sleep Mode -Turn on to have the console power down automatically after 30 minutes of inactivity
b. Pause Mode -Turn on allow 5 minutes of pause, turn off to have the console pause indenitely
c. Maintenance - Reset maintenance reminder message and odometer readings
d. GS Mode - Returns the elevation to lowest setting when pause is pressed
e. Beep Mode- Turns the speaker (beep sound) on or off.
5. Security - Sets the Child Lock function. This function locks out the keypad until a pre-determined key sequence is
pressed. Key sequence = Incline UP held down together until unlocked.
Loading ...
Loading ...
Loading ...