Loading ...
Loading ...
Loading ...
43
www.spirittness.com
Treadmill will only achieve approximately 7 mph but
shows higher speed on display
This indicates motor should be receiving power to oper-
ate. Low AC voltage to treadmill. Do not use an extension
cord. If an extension cord is required it should be as short
as possible and heavy duty 16 gauge minimum. Low volt-
age. Contact an electrician or your Spirit Fitness dealer.
A minimum of 120 volt AC current is required.
High belt/deck friction. See General Maintenance section
on cleaning the deck. If cleaning doesn’t prevent this from
reoccurring, check to see if there is signicant wear of the
deck. If so, the deck may need to be ipped if it is on its
original side.
Tread-belt stops quickly/suddenly when tether cord
is pulled
High belt/deck friction. See General Maintenance. If
cleaning doesn’t prevent this from reoccurring, check the
amp draw of the motor. If this is high and there are signs
of signicant wear of the deck, it may need to be ipped
if it is on its original side.
Treadmill trips on board 20 amp circuit
Treadmill may not be grounded. Static electricity is
“crashing” the computer. Refer to Grounding Instructions
on page 6.
Tighten all bolts. Check that machine is leveled. Adjust
levelers if needed using a wrench.
Computer shuts off when console is touched (on
a cold day) while walking/running
Noises while in uses (squeaks, bumps, clicking, etc.)
Loading ...
Loading ...
Loading ...