Loading ...
Loading ...
Loading ...
6 SettingupyourTV
Favorites browser
NOTE Ifadigitalchannelis notprogrammed,eitherthroughtheautomatic
channelscanorthe Channeladdfunction,see"AutoTuning"onpage
52,youwill haveto tunetheRFchannelusingtheChannelNumbers
andthe(Dash 100) buttonontheremotecontrol.
SwitchingbetweentwochannelsusingChannelRetum
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1 Select the first channel you want to view.
2 Select a second channel using the Channel Number buttons
(and the (Dash 100) button if selecting a digital channel).
3 Press the CH RTN button on the remote control.
The previous channel will display. Each time you press the CH
RTN button, the TV will switch back and forth between the last
two channels that were tuned.
NOTE IfyoupresstheCHRTNbuttonfromanon-antennainput,theTV
will returntothelast-viewedinput.
Switchingbetweentwo channelsusingSurfLockTM
The SurfLock TM feature temporarily "memorizes" one channel to
the CH RTN button, so you can return to that channel quickly from
any other channel by pressing the CH RTN button.
To memorize a channel to the CH RTN button:
1 Tune the TV to the channel you wish to program into the CH
RTN button.
2 Press and hold the CH RTN button for a few seconds until the
message "Memorized" appears on the screen. The channel has
been programmed to the CH RTN button.
3 You can then change channels repeatedly, and when you press
the CH RTN button, the memorized channel will be tuned.
The TV will return to the memorized channel one time only. Once
you press the CH RTN button and then change channels again, the
CH RTN memory will be cleared and the button will function as
Channel Return, by switching back and forth between the last two
channels that are tuned.This feature also works for extemal inputs.
Loading ...
Loading ...
Loading ...