Loading ...
Loading ...
Loading ...
EN
9-Remote control (Wi-Fi)
31
Note: Wi-Fi Network
It is not possible to connect the appliance to a public Wi-Fi network. It may cause
malfunction.
Note: Use same Wi-Fi
Connect with your smartphone to the network you want to connect the product to.
Note: Remote control expiration
Once the remote control is activated, if the end user doesn’t start any cycle from App in
10 minutes, the appliance will go to Networked Delay Start Mode, and keeps remote
control up to 24 hours, then shut off .
9.4 Appliance pairing (on app)
1. The App is available for devices running both Android and iOS, both for tablets and
for smartphones.
2. Get all the details of the Wi-FI functions by browsing the App in DEMO mode.
3. The frequency of the home Wi-Fi network has to be set on the 2.4 GHZ band. You
cannot confi gure the machine if your home network is set to the 5 GHZ band.
4. Open the App, create the user profi le (or log-in if it is already created previously)
and pairing the appliance following the instructions on the device display.
9.5 To enable remote control
1. Check that the router is switched on and connected to the Internet.
2. Load the laundry, close the door, add the detergent if it’s necessary.
3. Turn the programme selector to the REMOTE CONTROL (Wi-Fi) position .
REMOTE CONTROL
The door will lock and the controls on the control panel will be disabled.
4. Start the cycle using the App. When the cycle has been completed, turn off the
machine by turning the programme selector to the OFF position to unlock the door.
9.6 To disable remote control
1. To exit REMOTE CONTROL mode while a cycle is underway, turn the programme
selector to any position other than REMOTE CONTROL (Wi-Fi), without going
through the OFF. The control panel on the appliance will be operative once again,
and if the cycle is paused, you will be able to open the door once the DOOR
LOCKED indicator light switches off .
2. For safety reasons, in some wash cycle phases, the door can be opened only if the
level of the water is below its lower edge and if the temperature is below its lower
edge. If these conditions are met, wait for the DOOR LOCKED light to switch off
before opening the door.
3. With the door closed, turn the knob to the REMOTE CONTROL (Wi-Fi) position to
control the appliance using the App once again. If there is a cycle underway, it will
continue.
Loading ...
Loading ...
Loading ...