Loading ...
Loading ...
Loading ...
EN
5-Control panel
17
5-12
5-13
5-13
5.5.7 Function button“
This button (Fig.5-13) allows you to choose between three
“
• This button (Fig.5-13) allows you to choose be-
tween three diff erent options, depending on the
selected programme:
- STAIN LEVEL
• Once the programme has been selected the wash time
set for that programme will be automatically shown.
• This option allows you to choose between 3 lev-
els of wash intensity modifying the length of the
programme, depending on how much the fab-
rics are soiled (can only be used on some pro-
grammes as shown in the table of programmes).
- RAPID CARE
• The button becomes active when you select the RAP-
ID CARE (14‘/30‘/44‘) programme on the knob and
allows you to select one of three durations indicated.
5.5.6 Function button“
This button (Fig.5-12) allows you to choose between three
“
• This button (Fig.5-12) allows you to choose between
three diff erent options:
- PREWASH
• This option allows you to make a prewash and it is particular-
ly useful for heavily soiled loads (can be used only on some
programmes as shown in the table of programmes).
• We recommend you use no or a small amount of
detergent quantities shown on the detergent pack.
- EXTRA RINSE
• This option allows you to add one rinse at the end of
the washing cycle and is useful for people with deli-
cate and sensitive skin, for which a small amount of
detergent residue can cause irritations or allergies.
• It is advisable to also use this function for the child-
ren clothes and for the washing of heavily soiled
items, which requires a lot of detergent to be used,
or for the washing of toweling items whose fi bers
mostly have the tendency to hold the detergent.
- ANTICREASE
• This option allows the washing machine keeps
intermittent operation after fi nal spin to shake off the
clothes to prevent mildew and odor, reduce wrinkles
and make them smoother after hanging up.
• Under „ANTICREASE“ function, the max. spin speed will
decrease. After selecting this function, the user can no
longer select the speed. During the operation, the LED
display shows „-“ „--“ „---“„----“ “-----” “------” and this
phase lasts for 12 hours at most, users can touch „Start /
Pause“ to terminate the programme at any time.
Note: Options
These options must be selected before pressing the START/PAUSE button.
Loading ...
Loading ...
Loading ...