Loading ...
Loading ...
Loading ...
EN
6-Programmes
23
FITNESS CARE
The perfect combination of time and performance. Created to eliminate dirt from
athletic garments and sportswear. A low temperature wash recommended for small
loads of synthetic items.
RINSE
This program performs 2 rinses with an intermediate spin (which can be reduced or
excluded by using the appropriate button). It is used for rinsing any type of fabric,
for example after a wash carried out by hand.
REMOTE CONTROL (Wi-Fi)
Position that you have to select when you want to enable / disable remote control
through the App, via Wi-Fi. In this case, the start of cycle will take place through
the App commands. More details in the REMOTE CONTROL (Wi-Fi) section.
COTTONS
This programme is suitable for washing coloured cotton garments at 40°C or for en-
suring the highest degree of cleanliness for cotton resistant laundry washing at 60°C or
90°C.The fi nal spin is at maximum speed that ensures excellent water removal.
ECO 40-60
The ECO 40-60 programme is able to clean normally soiled cotton laundry de-
clared to be washable at 40°C or 60°C, together in the same cycle. This pro-
gramme is used to assess the compliance with the EU Ecodesign legislation (envi-
ronmentally friendly products design).
WOOL & HAND WASH
This programme performs a wash cycle dedicated to the wool fabrics that can be
washed in a washing machine, the articles to be washed by hand.
20°C
This innovative programme, allows you to wash diff erent fabrics and colours
together, such as cottons, synthetics and mixed fabrics at only 20°C and provides
an excellent cleaning performance.
SYNTHETIC & COLOURED
This programme allows you to wash diff erent fabrics and diff erent colours all
together. The rotation movement of the drum and the water levels are optimized,
both during the washing the rinsing phase. The accurate spin action, ensures a
reduced formation of creases in the fabrics.
DRAIN & SPIN
The program completes the drain and a maximum spin. It is possible to delete or
reduce the spin through the SPIN SELECTION button.
Note: The procedure to check the number of cycle that the machine has run.
Procedure:under standby mode,select “DRAIN & SPIN” programme fi rst,then press
“speed” and “delay” at the same time, it will display the number of running cycle for 2
seconds,and then back to standby interface.The cumulativer running cycles will add
after the programme ends.The running cycles will be displayed in hexadecimal it is
over 9999.
Loading ...
Loading ...
Loading ...