Loading ...
Loading ...
Loading ...
EN
5-Control panel
20
5.6.2 Change the language
• If you want to change the setting language you will have to press simultaneously “Delay”
and “Option” buttons for about 5 seconds, the language choose last time will appear on
display, and you will be able to choose a new language (by pressing button “speed” or
”temperature”).
• Confi rm by pressing the START/PAUSE button.
5.6.3 Choosing the type of detergent used
• Thanks to Eco Doser, the appliance is able to suggest the optimal amount of washing
detergent to pour into the drawer based on the actual load.
• In order for the Eco Doser to work properly, it is necessary to select the type of deter-
gent used, choosing between normal or concentrated liquid detergent or powder de-
tergent.
• Press „speed” or “temperature” button to display the available options and press
START/ PAUSE to confi rm your choice.
5.6.4 Changing the type of detergent used
• If you wish to change the type of detergent used, you will need to press and hold down
“Delay” and “Option” buttons simultaneously for about 5 seconds. The display shows
the detergent selection option again.
• Press “speed” or “temperature” button to display the available options and press
START/ PAUSE to confi rm your choice.
5.6.6 Changing the Water hardness level setting
• If you wish to change the type of detergent used, it is necessary to fi rst go through the lan-
guage and type of detergent change menu (and change the language and type of detergent
used) by holding down “delay” and “option” buttons simultaneously for about 5 seconds.
• Once you have confi gured the language (and the type of detergent used) as explained
in the dedicated paragraphs, you can select the desired water hardness level using but-
ton “speed” or “temperature” button.
• Confi rm by pressing the START/PAUSE button.
5.6.5 Setting the Water hardness level
• In order to make some automatisms of the appliance work correctly, it is necessary to
set the Water Hardness level.
Water Hardness level:
L1 = LOW (0-12 °fH o 0-7 °dH)
L2 = MEDIUM (13-30 °fH o 8-17 °dH)
L3 = HIGH (≥ 30 °fH o ≥ 17 °dH)
• To confi rm the standard water hardness level set by the factory, press START/PAUSE button.
• If you want to change the standard water hardness setting, press the “speed” or “tem-
perature” button.
• Once chosen the water hardness level, confi rm by pressing the START/PAUSE button.
Note: Water hardness
The default setting for the water hardness is set in the factory at level 2 (L2) as this
satisfi es the requirements of the majority of users.
Loading ...
Loading ...
Loading ...