Loading ...
Loading ...
Loading ...
34
CLEANING THE RAIN COLLECTOR
1. Rotate the rain collector by 30° counter-clockwise until it is in the unlock position as shown.
Rotate the rain collector by 30° anticlockwise.
lean
N
N
“Unlock” Position“Lock” Position
N
Only use attachments / accessories specied by the manufacturer.
Placement of this product on certain types of wood may result in damage to its nishing
CLEANING THE THERMO/HYGRO SENSOR
2. Gently remove the rain collector.
3. Clean and remove any debris or insects.
4. Wait until the parts are fully dry, and then reinstall them, and return the rain collector to a locked
position.
1. Unscrew the 2 screws at the bottom of the sensor casing.
2. Gently pull out the shield.
3. Carefully remove any dirt or insects inside the sensor casing, making sure the inside sensors remain dry.
4. Clean the shield with water and remove any dirt or insects.
5. Once the parts are fully clean and dry, reinstall them and replace the screws.
BATTERY REPLACEMENT
If the low battery indicator icon is displayed in the outdoor temperature and humidity section or
the corresponding CH section of the LCD console display, this indicates that the batteries in your
wireless weather sensor are running low and should be replaced. Make sure to replace all batteries at
the same time.
CARE AND MAINTENANCE
key to silence the alert alarm or let the alarm automatically turn off after 2
minutes.
Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and
readings will ash.
If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep
ash until the weather reading is out of the alert range.
The weather alert will sound again when the weather readings falls into the alert range again.
If the low battery indicator “ ” displayed in OUT
or CH section, it indicates that the current channel
wireless or outdoor 5-in-1 sensor battery power
is low. You should replace all the batteries in the
Unscrew the rain collector by turning it 30°anti-clockwise.
Gently remove the rain collector.
Clean and remove any debris or insects.
Install the collector when it is clean and fully dried.
“Unlock” Position“Lock” Positio
Remove the 2 screws at the bottom of the radiation shield.
Gently pull out the shield.
Carefully remove any dirt or insects on the sensor casing (do not
let the sensors inside get wet).
Clean the shield with water to remove any dirt or insects.
Install all the parts back when they are clean and fully dried.
Keep and reading the “User manual” is highly recommended. The manufacturer and
supplier cannot accept any responsibility for any incorrect readings, export data lost and any
consequences that occur should an inaccurate reading take place.
This product is designed for use in the home only as indication of weather conditions. This
product is not to be used for medical purposes or for public information
Do not subject the unit to excessive force, shock, dust, temperature or humidity.
Do not cover the ventilation holes with any items such as newspapers, curtains etc.
Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-
Do not clean the unit with abrasive or corrosive materials.
Do not tamper with the unit’s internal components. This invalidates the warranty.
Placement of this product on certain types of wood may result in damage to its nishing
for which manufacturer will not be responsible. Consult the furniture manufacturer’s care
instructions for information.
Loading ...
Loading ...
Loading ...