Loading ...
Loading ...
Loading ...
14
PAIRING THE WIRELESS WEATHER SENSOR WITH THE DISPLAY CONSOLE
SET THE LCD DISPLAY VIEWING ANGLE
CHANGING BATTERIES AND MANUAL PAIRING
Whenever you change the batteries in the sensor, you will need to manually repair it with the display
console. Follow these instructions to manually pair your console with the sensor.
1. Once your display console powers on, it should automatically search for and connect to the
wireless weather sensor. If the console does not connect within the rst 15 minutes, refer to the
following section, Changing Batteries and Manual Pairing, for instructions on manual pairing.
2. You will see the icon of an antenna blinking in the temperature and humidity (outdoor) section of
the display.
3. Once the pairing process completes, the antenna icon will appear solid (not blinking), and the
readings for outdoor temperature and humidity, wind speed, wind direction, and rainfall will
appear in their designated sections of the LCD display.
If you have the display console wall-mounted or on a table stand, the viewing angle may need
adjustment. Press or buttons while the display is in normal operating mode to adjust the
viewing angle.
NOTE: If nothing appears on the LCD display screen after you plug in the power adaptor, use a pin or
similar small object to press the RESET button.
1. Change the batteries in the wireless weather sensor.
2. Press the SENSOR/WI-FI button at the back of the console.
3. Press the RESET key on the underside of the wireless weather sensor. Make sure after pressing
the RESET key that the red LED indicator is ashing every 12 seconds.
WI-FI
SENSOR
RESET
REFRESHBARO
UNIT
3
1 2
Loading ...
Loading ...
Loading ...