Loading ...
Loading ...
Loading ...
27
TEMPERATURE/HUMIDITY & TRENDS
VIEWING OUTDOOR CHANNELS
RECEIVING WIRELESS SENSOR SIGNALS
Press the °C/°F button to switch between Celsius and Fahrenheit temperature measurements. The
arrows show the trend in changes to the temperature/humidity levels.
This console is capable of pairing with the wireless weather sensor and up to 7 additional wireless
thermal-hygro sensors. If you have 2 or more sensors installed, press the CH button to cycle between
dierent wireless channels in normal operating mode, or press and hold the CH button for two (2)
seconds to toggle auto-cycle mode on, which cycles through displaying all connected channels at
4-second intervals. While the console is in auto-cycle mode, you can press the CH button once to
toggle auto-cycle mode o and continue displaying the current channel.
1. While in normal operating mode, press the SENSOR/SYNC button once to start receiving the
current sensor signal on the channel being displayed. (i.e. if you’re on CH 1 and press the SENSOR/
SYNC button, the current wireless sensor signal being received will only display on CH 1.) The
signal icon will start ashing.
2. The signal icon will continue ashing until it successfully receives a signal. If no signal is received
within ve (5) minutes, the icon will disappear.
NOTE:
• If/when the temperature outside falls below -40°F (-40°C), the LCD display will show the word
“Lo” in the temperature section. If the temperature outside rises above 176°F (80°C), the LCD
display will show the word, “HI” in the temperature section.
• If/when the humidity level falls below 1%, the LCD display will show the word “Lo” in the humidity
section. If/when the humidity level rises above 99%, the LCD display will show the word, “HI” in
the humidity section.
Alarm o
Temp/Humidity Trend
Arrow Icon
Rising Steady Falling
Alarm o
No signal Weak signal Good signal
Loading ...
Loading ...
Loading ...