Loading ...
Loading ...
Loading ...
19
UPDATING THE FIRMWARE
This display console supports OTA (over the air) Function Firmware and WI-FI System Firmware
updates via any web browser (not mobile browser) on a PC that is connected to WI-FI. The update
function for both types of updates can be found at the bottom of the Advanced Tab on the wireless
settings interface (see Advanced Settings via Web Interface on page 20.
Follow the steps below to update your device’s Function or WI-FI System Firmware
1. Download the latest version of the rmware (function or WI-FI) and save it to your PC.
Remember where you saved the le.
2. Press and hold the SENSOR/WI-FI button for six (6) seconds to put the display console into AP
mode, then connect the PC to the console (refer to steps in Set Up WI-FI Connection on page 18.
3. Click the button that says Browse next to the appropriate type of update that you downloaded
and navigate to the location where you saved the le.
4. Click the corresponding Upload button to transfer the update le to the console.
5. The le will install automatically once it is uploaded. You can view update progress on the
display console in the wind direction section (the number displayed will correspond to the
percentage completed, so 50 = 50% and so on).
You can also use the Apple ipad's "WunderStation" app to login your own weather station to
view the live data.
underStatio
To view your weather station live data in a web browser (PC or mobile version), please visit
https://weathercloud.net and sign in your own account.
icon inside the pull down menu of your station.
", " ", " " icon to view the live data of your weather
The console supports OTA rmware update capability. Its rmware may be updated over the
air anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity.
Update function, however, is not available through mobile/smart devices.
Two types of rmware updates are available, namely Function Firmware and System WI-FI
Firmware, and are located at the bottom of ADVANCED page.
Current Function
firmware version
Current WI-FI
firmware version
Current Function
rmware version
Current WI-FI
rmware version
Download the latest version rmware (function or WI-FI) to your PC.
Set the Console into AP (access point) mode then connect the PC to the console (ref to
"SETUP WI-FI CONNECTION" section in previous page).
To update the Function rmware, click the
Browse
in Function rmware section and
browse to the location of the le you download in step 1. To update the WI-FI rmware, click
Browse
in WI-FI rmware section.
Click the corresponding
Upload
transfer the rmware le to console (indicated by
a transfer completion %).
Upload
30% ...
BrowseC:\download\PWS_SYS.bin
Upload
Browse
Function firmware version: 1.00
WiFi firmware version: 1.00
3
4
Once the console received the rmware le, it
executes the update automatically as indicated
by the update progress on display (i.e. 100 is
completion).
The console will restart once the update completed.
Function and WI-FI rmware cannot be updated at the same time, you need to update one by
Please keep connecting the power during the rmware update process.
Please make sure your PC's WI-FI connection is stable.
When the update process start, do not operate the PC and console.
During rmware update the console will stop upload data. It will reconnect to your WI-FI router
and upload the data again once the update success. If the console cannot connect to your
router, please end the SETUP page to setup again.
After the rmware updates, user might need to input the Weather Underground ID and
password again.
This console is designed to obtain the local time by synchronize with the assigned internet time
server. If you want to use it ofine, you can set the time and date manually. During the rst time
startup, press and hold the key for 6 seconds and let the console back to
normal mode.
In normal mode, press and hold key for 2 seconds to enter setting.
The setting sequence: Time Zone → → → → 12/24 hour format →
→ → → M-D/D-M format → Time sync ON/OFF → weekday Language.
key to change the value. Press and hold the key for quick-adjust.
key to save and exit the setting mode, or the unit will automatically
exit the setting mode 60 seconds later without pressing any key.
In normal mode, press key to switch between year and date display.
During the setting, you can press and hold key for 2 seconds to back to normal
model.
Download the latest version rmware (function or WI-FI) to your PC.
Set the Console into AP (access point) mode then connect the PC to the console (ref to
"SETUP WI-FI CONNECTION" section in previous page).
To update the Function rmware, click the
Browse
in Function rmware section and
browse to the location of the le you download in step 1. To update the WI-FI rmware, click
Browse
in WI-FI rmware section.
Click the corresponding
Upload
transfer the rmware le to console (indicated by
a transfer completion %).
Upload
30% ...
BrowseC:\download\PWS_SYS.bin
Upload
Browse
Function firmware version: 1.00
WiFi firmware version: 1.00
Once the console received the rmware le, it
executes the update automatically as indicated
by the update progress on display (i.e. 100 is
completion).
The console will restart once the update completed.
Function and WI-FI rmware cannot be updated at the same time, you need to update one by
Please keep connecting the power during the rmware update process.
Please make sure your PC's WI-FI connection is stable.
When the update process start, do not operate the PC and console.
During rmware update the console will stop upload data. It will reconnect to your WI-FI router
and upload the data again once the update success. If the console cannot connect to your
router, please end the SETUP page to setup again.
After the rmware updates, user might need to input the Weather Underground ID and
password again.
This console is designed to obtain the local time by synchronize with the assigned internet time
server. If you want to use it ofine, you can set the time and date manually. During the rst time
startup, press and hold the key for 6 seconds and let the console back to
normal mode.
In normal mode, press and hold key for 2 seconds to enter setting.
The setting sequence: Time Zone → → → → 12/24 hour format →
→ → → M-D/D-M format → Time sync ON/OFF → weekday Language.
key to change the value. Press and hold the key for quick-adjust.
key to save and exit the setting mode, or the unit will automatically
exit the setting mode 60 seconds later without pressing any key.
In normal mode, press key to switch between year and date display.
During the setting, you can press and hold key for 2 seconds to back to normal
model.
Loading ...
Loading ...
Loading ...