Loading ...
Loading ...
Loading ...
11
2. Insert the nut into the hexagonal hole by the sensor and hold it in place, then insert the screw
through the other side. Use a screwdriver to tighten the screw. Do not insert the screw rst, or the
nut may not line up correctly with the designated hole.
3. Insert the bottom of the pole into the square hole on the plastic stand, making sure the arrows are
lined up as shown.
Please note that there are two di erent ways you can attach the pole to the base, depending on how you
will be mounting it outdoors. If you will be fastening the sensor directly to a railing, use the option that
positions the stand perpendicular to the sensor pole. If you will be fastening it to a pole, use the slot
that positions the base parallel to the sensor pole.
2. The red LED will begin ashing every 12 seconds.
hole
Loading ...
Loading ...
Loading ...