Loading ...
Loading ...
Loading ...
17
NOTES: When the WI-FI setup is complete, your computer or mobile device will return to the default
WI-FI connection. If it does not, simply open your device’s wireless network settings and manually
reconnect.
While in AP mode, you can press and hold the SENSOR/WI-FI button for six (6) seconds to exit AP
mode. The display console will simply restore the previous AP settings.
WI-FI CONNECTION STATUS
TIME SERVER CONNECTION STATUS
ADVANCED SETTINGS VIA WEB INTERFACE
The following icons on the LCD display screen show the WI-FI status:
Once the display console has connected to the internet, it will attempt to connect to the internet time
server to obtain the UTC time. Once the connection is successful and the time has been updated, the
“SYNC” icon will appear above the WI-FI icon on the LCD.
Once you are connected via WI-FI to the display console and have opened the settings page at
http://192.168.1.1, clicking on the tab that says ADVANCED will open the following page. This page
will allow you to set and view specic calibration data of your display console, and also update the
rmware if you are on PC.
To display the correct time for your specic time zone, you’ll need to change the time zone in the
CLOCK setting mode from 00 (default) to your specic time zone (e.g. -5 for EST). If you don’t know
your time zone, you can look it up online.
1. In normal operating mode, press and hold the CLOCK SET button for two (2) seconds to enter
the clock setting menu.
2. Press the or buttons to adjust the time zone, and then press and hold the CLOCK SET
button for two (2) seconds to conrm and exit the menu. Please refer to the Setting the Time
section of the manual on page 24 for details of other available clock settings.
The time will automatically sync with the internet time server at 12:00AM and 12:00PM each day. If you
would like to force it to sync sooner than that, press the REFRESH button on the console to update the
time in the next minute.
Select the Wi-fi router (SSID) you will connect to
Manually enter the SSID if not on the list
Select router’s security type (usually WAP2)
Check to confirm upload to Weather Underground
Enter new Station ID and Station key assigned
by Wunderground (Weather Underground)
Check to confirm upload to Weathercloud
Select time server
Press to complete the setting
Router’s password (leave blank if unsecured)
Press to allow add
router manually
Password record remark
(If you entered password)
Current ID and
key recorded (if any)
Current ID and key
recorded (if any)
Enter new Station ID and Station key
assigned by Weathercloud
Solid: the display console is
connected to your wireless router
Flashing: the display console is
attempting to connect to your wireless router
Flashing: the display console is
currently in AP (access point) mode
Press “SETUP” icon
to SETUP page
Below is the WI-FI icon status on the console LCD:
Flashing: Console is trying to
connect to WI-FI router
Select the Wi-fi router (SSID) you will connect to
Manually enter the SSID if not on the list
Select router’s security type (usually WAP2)
Check to confirm upload to Weather Underground
Enter new Station ID and Station key assigned
by Wunderground (Weather Underground)
Check to confirm upload to Weathercloud
Select time server
Press to complete the setting
Router’s password (leave blank if unsecured)
Press to allow add
router manually
Password record remark
(If you entered password)
Current ID and
key recorded (if any)
Current ID and key
recorded (if any)
Enter new Station ID and Station key
assigned by Weathercloud
Solid: the display console is
connected to your wireless router
Flashing: the display console is
attempting to connect to your wireless router
Flashing: the display console is
currently in AP (access point) mode
Press “SETUP” icon
to SETUP page
Flashing: Console is trying to
connect to WI-FI router
updated, the “ ” icon will appear on the LCD.
Loading ...
Loading ...
Loading ...