Loading ...
Loading ...
Loading ...
13
INSTALLING THE BACKUP BATTERY
POWERING THE DISPLAY CONSOLE
Your display console can pair with the wireless weather sensor as well as up to seven (7) optional
wireless hygro-thermo outdoor sensors (not included).
5. The mounting location should be within 492 ft. (150 m) of the location where you will be keeping
the display console with few obstructions and relatively clear sightlines. If there are multiple walls/
levels/buildings in between the sensor and the display console, the functionality could be
compromised and you will need less space between the two.
6. Use the built-in level to make sure the sensor is parallel with the ground.
1. Detach the table stand.
2. Unscrew the console battery door screw.
3. Remove the battery door.
4. Insert a new button cell battery.
5. Replace the battery door and tighten the screw.
NOTE: The backup battery can assist with backing up the time & date, MAX/MIN data, weather
records from the past 24 hours, alert settings, the oset value of weather data, and the sensor(s)
channel history. The built-in memory will backup router and weather server settings.
1. Connect the power cable to a wall outlet or power source and to the display console power
connection port.
2. The display console should power on, and all the segments of the LCD display screen should be shown.
3. The display console will automatically start AP mode.
DISPLAY CONSOLE SETUP
Screw
CR2032
B
MOUNTING ON A RAILING
Loading ...
Loading ...
Loading ...