Logia LOWSC510WB USER GUIDE

Loading ...

PAIRING ADDITIONAL WIRELESS SENSORS WITH THE DISPLAY CONSOLE

NOTE: Any time you press the RESET key underneath the wireless weather sensor, it generates a

new ID code for pairing with the console, and you will need to press the SENSOR/WI-FI button on the

console for the two devices to pair again.

The display console should automatically search and pair with any additional wireless hygro-thermo

outdoor sensors you install. You can also press the SENSOR/WI-FI button to search manually for the

sensor while on the channel where it should display. Once your sensor has paired, the sensor signal

strength indicator and weather information will appear in the temperature and humidity (outdoor)

section when you are on the channel associated with that sensor.

WI-FI CONNECTION

SET UP WI-FI CONNECTION

When you  rst power up the console, or press and hold the SENSOR/WI-FI button for six (6) seconds,

the console LCD display will show the letters “AP” and an

icon to signify that it has entered

Access Point (AP) mode. At this time it will be ready for the WI-FI settings to be adjusted.

Use your smartphone, tablet, or computer to connect to the console via WI-FI by following these steps:

1. On PC, open your WI-FI network settings. On Android

™

or iOS devices, go to settings menu

and then select Connections/WI-FI to open the network settings.

2. Locate the display console’s SSID from the list. It should appear as PWS-XXXXXX (where all

the X’s are integers) in the list. Tap on the SSID to connect. This step will take several seconds.

The console will automatically search and pair up your wireless sensor(s)

paired up, the sensor signal strength indicator and weather information will appear on your

This unit is designed to automatically synchronize its calendar and clock when connected to

, the unit will automatically synchronize the time instantly and 12:00am per day

The time sync function only work with the PC software "W

ime sync up is according to your current PC time, so please ensure your PC time is

Once the PC time sync up the

icon will appear in the

ou can also enable or disable auto time sync function by press and hold

Jot down your ID and key for the further setup step.

When you rst power up the console, or press and hold the

seconds in normal mode, the console LCD will show "AP" and "

entered AP (access point) mode, and is ready for WI-FI settings.

Use the smart phone, tablet, or computer to connect to the console through WI-FI.

In PC choose WiFi network settings or In Android / iOS choose setting →

console’s SSID: in the list and it will need several second to connect.

PC WI-FI network interface Android WI-FI network interface

Once connected, enter the following IP address into your internet browser’s address bar, to

access the console’s web interface:

http://192.168.1.1

Some browsers will treat as a search, so make sure you include header.

Recommended browsers, such as the latest version of Chrome, Safari, Edge, Firefox or

Opera.