Loading ...
Loading ...
Loading ...
10
WIRELESS WEATHER SENSOR SETUP
INSTALL BATTERIES
ASSEMBLE STAND AND POLE
1. Unscrew the door to the battery compartment on the underside of the main sensor unit.
2. Insert three (3) new AA alkaline batteries, making sure the polarities match up with the markings
inside the compartment.
1. Insert the top of the pole into the square hole at the bottom of the weather sensor. Ensure that the
arrow indicators are lined up as shown.
3. Replace the battery door, ensuring the watertight O-ring is properly aligned. This maintains the
water-resistant seal.
4. Replace the battery screw, making sure it is tightly fastened down. The red LED should begin
ashing every 12 seconds.
Loading ...
Loading ...
Loading ...