Loading ...
Loading ...
Loading ...
50
Figure 4-59 FTP storage
Step 2 Click
FTP Storage
.
Step 3 (Optional) Set
FTP Custom Naming
as required. Click to modify the corresponding
name.
Step 4 Select a server tab, and then select
On
to enable the storage function of this server.
Step 5 Configure parameters.
Table 4-26 FTP storage parameters
Parameter Description
Protocol Select a protocol. SFTP is recommended.
Connect mode
●
Short-lived Link
: Connects with the FTP server when uploading each
image and disconnect after upload completes.
●
Long-lived Link
: The device stays connected with the FTP server.
Encode Type
Select an encode mode.
●
UTF-8
: International universal font library, with various languages.
●
GB2312
: National standard font library, only with Chinese characters
and some common foreign languages.
Test
Click
test
to test whether the FTP server is successfully connected, and the
corresponding test file will be generated according to the selected encode
mode.
Address The IP address of the FTP server.
Port The port number of the FTP server, 22 by default.
Username The username of the FTP server.
Loading ...
Loading ...
Loading ...