Loading ...
Loading ...
Loading ...
48
Parameter Description
Pulse Width
Configure the pulse width of flashing light. The higher
the value, the brighter the light.
Delay Time
Configure the delay time of the light to keep the
snapshot in sync with the flash.
Burst Mode
You can select the level that triggers the flashing light.
Currently, only
Low
level is supported.
Prevalue
When setting
Work Mode
to
Default
, you need to set the
brightness prevalue.
Strobe
Output Mode
Same as
Work Mode
of flashing light.
Frequency Set the frequency of the strobe.
Step 3 Click
Confirm
.
The light type in this section is for reference only, and might differ from the actual model.
4.5.5 Storage Management
Configure the storage method and location of pictures and records.
4.5.5.1 Storage
4.5.5.1.1 Local Storage
You can set the storage ratio of locally stored pictures and records, view the storage state, and set
the HDD state.
Step 1 Select
Setting
>
Storage
>
Local Storage
>
Local Storage
.
Figure 4-57 Local Storage
Step 2 Select the container according to the storage ratio of pictures and records.
●
The record container is automatically set with the change of the picture container.
●
When the picture container is set to 0%, pictures cannot be stored. When the picture
container is set to 100%, records cannot be stored.
Step 3 Click
Read Only
or
Read & Write
to set the read and write access to the HDDs of the
Device.
Step 4 Click
Confirm
, and then restart the Device.
Loading ...
Loading ...
Loading ...