Loading ...
Loading ...
Loading ...
6
Figure 4-1 Device initialization
Step 3 Select
Email Address
, and then enter an email address.
The email address is used for resetting password.
Step 4 Click
Confirm
.
Step 5 Enter
Username
and
Password
on the login window, and then click
Login
.
The account will be locked for five minutes after five failed username or password
attempts.
Step 6 On the
Live
page, click
Please click here to download and install the plug-in
to
download and install the plug-in.
The
Live
page is normally displayed.
4.1.3 Resetting Password
When you forget the password, you can set a new password.
●
You need to enter an email address during device initialization to receive the security code.
Otherwise, password reset is not available. You can also change the email address from
Setting
>
System
>
Account
>
Account
>
Username
. For details, see "
4.5.6.3.1 Managing Users".
●
The password of a device can only be reset up to 10 times a day.
●
You can only get two security codes for each QR code.
●
Use the security code to reset the password within 24 hours after you receive it. Otherwise the
security code will become invalid.
Step 1 Open the browser and enter the IP address of the Device, and then press Enter.
Step 2 Click
Forgot password?
on the login page, and then click
OK
in the pop-up window.
If Internet Explorer is used,
Stop running this script
is displayed. In this case, click
No
to
continue to run the script.
Step 3 Scan the QR code, and the scan result will be sent to the reserved email.
Step 4 Send the received scan result to support_gpwd@htmicrochip.com through the reserved
email address to get the security code.
Loading ...
Loading ...
Loading ...