Loading ...
Loading ...
Loading ...
4
3.2 Changing IP Address
You can acquire and change the IP address of devices accessed through wired network. This section
uses changing IP address with the ConfigTool as the example.
Step 1 Start the ConfigTool.
Step 2 Click
Modify IP
.
Step 3 Select the device(s) whose IP need(s) to be changed.
●
Change one IP address: Click
Edit
corresponding to the device.
●
Change IP addresses in batches: Select the devices, and then click
Batch Modify IP
.
Step 4 Set mode, IP, subnet mask and gateway.
Step 5 Click
OK
.
Figure 3-2 Change IP addresses in batches
3.3 Upgrading the Device
Single upgrade and batch upgrade are supported.
Step 1 Start the ConfigTool.
Step 2 Click
Device Upgrade
.
Step 3 Select the Device to be updated.
●
Update one by one: Click corresponding to the Device.
●
Update in batches: Select multiple devices, and then click
Batch Upgrade
.
Step 4 Select the update file.
Step 5 Update the Device.
●
Update one by one: Click to start updating.
●
Update in batches: Click
OK
to start updating.
During update, if the Device is disconnected, as long as the ConfigTool stays on the update
page, the upgrade will continue when the Device is reconnected.
3.4 Logging in to the Webpage
On the
Modify IP
page, click
Web
corresponding to the Device, and then you are directed to the
login page of the webpage. Enter the login username and password to log in.
Loading ...
Loading ...
Loading ...