Loading ...
Loading ...
Loading ...
25
Module Parameter Description
Exposure
Mode
●
In
Auto
mode, only
Manual
iris type is available.
●
In
Force
mode, several iris types are available, and you
also need to configure the
Iris Adjust Mode
. If
Manual
is selected, you can manually drag the slider to adjust
the value.
Iris Type Displays the detected iris type.
Mode
Select the way of adjusting exposure mode. You can select
from
Manual
and
Auto
.
Shutter
You can select the shutter value, or select
Customized
Range
, and then set the shutter range.
Only available when
Mode
is set to
Manual
.
Shutter Scope
Set the time range of shutter.
Only available when
Shutter
is set to
Customized Range
.
Gain Scope
Set the value range of gain.
Only available when
Mode
is set to
Manual
.
WB Mode Set scene mode to adjust the image to its best status.
Step 3 Click
Save
.
4.5.1.1.4 Configuring Cutout
The Device supports cropping snapshots and saving the cutouts. In addition, you can overlay the
face cutouts of drivers and front-seat passengers on the snapshots. Enabling bounding box of
vehicles is also available.
Step 1 Select
Setting
>
ITC
>
ANPR Snap
>
Cutout
.
Step 2 Select a channel.
Step 3 In the
Cutout
section, select the
Cutout Type
.
Figure 4-25 Cutout type
Step 4 In the
Track Box
section, select
On
to enable bounding box of vehicles.
Step 5 Select the bounding box type.
You can select whether to overlay speed of the vehicle on the bounding box.
Figure 4-26 Track box
Step 6 In the
Face Overlay
section, select whether to enable face overlay, and then select the
Loading ...
Loading ...
Loading ...