Loading ...
Loading ...
Loading ...
11
4.3 Radar Configuration
Configure the radar to accurately capture events during bad weathers and poor light conditions.
4.3.1 Configuring the Radar
Set the parameters of the radar and lanes, and calibrate the radar. Make sure that when the radar
sends signals to the camera, the camera can capture the right target.
Step 1 Select
Radar
>
Radar Settings
.
The information of the connected radar is displayed on the top of the page, and you can
adjust the sensitivity.
Under general situations, we recommend you leave the sensitivity as default to avoid false
detections.
Step 2 Set the lane width and direction based on the actual site.
Figure 4-9 Lane information
Step 3 Click
Calibrate by Radar & Video
.
Step 4 Select a channel on the prompted page, and then select the
Splicing Calibration
checkbox.
You can also calibrate the radar manually without enabling splicing calibration. In this case,
you need to manually measure the distance between the drawn calibration area and the
Device.
Loading ...
Loading ...
Loading ...