Loading ...
Loading ...
Loading ...
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the Device, hazard prevention, and
prevention of property damage. Read carefully before using the Device, and comply with the
guidelines when using it.
Transportation Requirements
●
Pack the Device with packaging provided by its manufacturer or packaging of the same quality
before transporting it.
●
Transport the Device under allowed humidity and temperature conditions.
Storage Requirements
Store the Device under allowed humidity and temperature conditions.
Installation Requirements
●
To avoid damage to the hard disk, the Device must be carefully installed in a horizontal position.
The device must never be placed in an inclined or vertical position.
●
Do not connect the MCB to the Device while the MCB is powered on.
●
Strictly comply with the local electrical safety code and standards. Make sure the ambient voltage
is stable and meets the power supply requirements of the device.
●
Do not connect the Device to two or more kinds of power supplies, to avoid damage to the
Device.
●
Use the accessories suggested by the manufacturer. Installation and maintenance must be
performed by qualified professionals.
●
When using a laser beam device, avoid exposing the surface of the Device to laser beam
radiation.
●
Personnel working at heights must take all necessary measures to ensure personal safety
including wearing a helmet and safety belts.
●
Do not place the Device in a place exposed to sunlight or near heat sources.
●
Keep the Device away from dampness, dust, and soot.
●
Put the Device in a well-ventilated place, and do not block its ventilation.
●
Use an adapter or cabinet power supply provided by the manufacturer.
●
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the Device label.
●
The device is a class I electrical appliance. Make sure that the power supply of the Device is
connected to a power socket with protective earthing.
●
Operating temperature: –40 °C to +65 °C (–32 °F to +149 °F).
●
The rated current of the Device is 5 A and the rated power is 2000 W.
Loading ...
Loading ...
Loading ...