Loading ...
Loading ...
Loading ...
51
Procedure
Step 1 Select
Setting
>
Event
>
Exception
.
Step 2 Select a type of event from SD card exception, network exception, invalid access, security
exception, and blocklist.
Step 3 (Optional) Select an event type.
You only need to select this for SD card and network exceptions.
Figure 2-48 No SD card for SD card exception
Step 4 Select the checkbox of
Enable
.
Step 5 Configure the parameters of each event.
Table 2-28 Parameters description
Parameter Description
Enable Select to enable the corresponding abnormality event.
Alarm-out Port
Select to enable the corresponding alarm output of abnormality event,
and select the corresponding port.
Post-alarm The alarm linkage keeps running for the defined time after alarm ends.
Original Image
Configure the storage available that triggers an abnormality alarm.
Only need to configure when setting
Event Type
to
Memory
insufficient
.
Original Image The original snapshot and license plate cutout image will be sent as
attachments in the email.
Only need to configure when selecting
Blocklist
.
Plate Cutout
Login Attempt
Configure the number of login attempts allowed. It ranges from 3–10
times.
Only need to configure when setting
Invalid Access
.
Send Email
The system sends an email to the defined email address when an alarm
is triggered. To set the email address, go to
Setting
>
Network
Settings
>
Email
.
Only need to configure when setting
Invalid Access
and
Blocklist
.
Step 6 Click
Save
.
Loading ...
Loading ...
Loading ...