Loading ...
Loading ...
Loading ...
39
Figure 2-45 General settings
Step 2 Configure the parameters.
Table 2-18 Parameters description
Parameter Description
Brightness
Adjust the overall image brightness. Change the value when the image is
too bright or too dark.
The bright and dark areas will have equal changes. The image becomes
blurry when the value is too high. The recommended value is from 40 to
60. The range is from 0 to 100.
It is 50 by default. The higher the value is, the brighter the image becomes.
Contrast
Change the value when the image brightness is proper but contrast is not
enough.
●
If the value is too big, the dark area is likely to become darker, and the
bright area is likely to be overexposed.
●
The picture might be blurry if the value is set too small. The
recommended value is from 40 to 60, and the range is from 0 to 100.
It is 50 by default. The higher the value is, the more obvious the contrast
between the bright area, and dark area will become.
Saturation
Adjust the color vividness, and will not influence the image overall
brightness.
●
The image becomes too flamboyant if the value is too big.
●
The image is not flamboyant enough if the value is too small. The
recommended value is from 40 to 60, and the range is from 0 to 100.
It is 50 by default. The higher the value is, the more flamboyant the image
becomes.
Gamma
Adjust the image brightness level. The higher the value, the brighter, and
blurry the image.
Fill Light Select IR or white light mode.
Day/Night
●
Color
: Applicable during the day, image shows in colors.
●
B/W
: Applicable during nights, the image is black and white.
●
Auto
: Set a value for brightness. When the brightness is higher or
lower than the value, the image shows in colors or black and white
respectively.
Only applicable when Fill Light is set to
IR Mode
.
Loading ...
Loading ...
Loading ...