Loading ...
Loading ...
Loading ...
45
server.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Register
.
Step 2 Check
On
to enable the function.
Step 3 Configure the parameters.
Table 2-23 Parameter description
Parameter Description
IP Address The IP address of the server on which the device registers.
Port The port of the server for auto registration.
Sub-Device ID
The device ID distributed by the server for auto registration. Make
sure that the ID is unique during auto registration.
Step 4 Click
Save
.
2.5.3.5 Configuring Multicast
When multiple users preview the video of the same device, unavailability might happen due to
network bandwidth restriction. You can fix it by setting up a multicast IP (224.0.0.0–239.255.255.255)
to access videos through the multicast protocol.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Multicast
.
Step 2 Select the checkbox of
Enable
to enable the function.
Step 3 Enable main stream or sub stream based on the actual situation and set IP address and
port number.
Step 4 Click
Save
.
2.5.3.6 Configuring Email
Configure the email, and when alarms or abnormal events are triggered, an email will be sent to the
recipient server through SMTP server. The recipient can log in to the incoming mail server to receive
emails.
After enabling this function, there is a risk of data leakage that the system will send the device data
to the given server.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Email
.
Step 2 Select the checkbox of
Enable
, and then configure the parameters.
Table 2-24 Parameter description
Parameter Description
SMTP Server
IP address of the outgoing mail server that complies with SMTP
protocol.
Loading ...
Loading ...
Loading ...