Loading ...
Loading ...
Loading ...
37
Figure 2-43 Device test
Step 2 Configure the parameters.
Table 2-17 Parameter description
Parameter Description
Test Barrier Opening/Closing
Click
Open
or
Close
to test whether the barrier responds
correctly.
Test Capture
Enter a plate number, click
Test
to trigger capture, and view the
snapshot in the
Live
page.
Test Screen Display
Enter some information, click
Test
, and view whether the
information is correctly displayed on the LED screen.
Test Voice Broadcast
Enter some information, click
Test
to check whether the device
plays the sound normally.
Voice broadcast is only available on select models.
Check for Abnormal Config Click
Check
, and system checks abnormality automatically.
Export Device Info Select the information of the device, and export it in batches.
2.5.1.12.2 Capture Adjustment Information
You can overlay shield area box, vehicle body box, license plate box, vehicle body trajectory, plate
trajectory, and capture area on the snapshots to assist you in checking whether the snapshots are
taken as you require.
Procedure
Step 1 Select
Setting
>
ANPR
>
Device Test
>
Capture Adjustment Info
.
Step 2 Select the checkbox for
Displays rules and tracking info
, and then select the types of
information to be displayed.
Step 3 Click
Save
.
Step 4 Go to the
Live
page, and then click to manually capture a license plate. On the
snapshot, you can see the rules and tracking information you selected. If they do not meet
Loading ...
Loading ...
Loading ...