Loading ...
Loading ...
Loading ...
40
Parameter Description
Default
Environment
Brightness
Default value for brightness. You can drag the slider to adjust the value.
The higher the value, the brighter the video image.
White Light
Select when the white light illuminator will work. If you select
Auto
, you
must specify the associated parameters that the illuminator will work
based on the values you defined.
Only applicable when Fill Light is set to
White Light
.
IR Light
●
Always Off
: Set the IR light to always on.
●
Always On
: Set the IR light to always off.
●
Day/Night
: Automatically turn on or off the IR light according to the
configured Day/Night mode.
Only applicable when Fill Light is set to
IR Mode
.
Light Brightness Set the illumination intensity when there are no vehicles passing.
Passing Light
Brightness
Set the illumination intensity when there are vehicles passing.
Step 3 Click
Save
.
2.5.2.1.2 Shutter
This section provides guidance on configuring camera shutter, including shutter mode, exposure
mode, gain mode, and scene mode.
Procedure
Step 1 Select
Setting
>
Camera
>
Image
>
Shutter
.
Step 2 Configure the parameters.
Table 2-19 Shutter parameters description
Parameter Description
3D NR
Video 3D NR
Select
Enable
to enable the function.
Video Spatial 3D
NR
Spatial video denoising. The higher the value, the fewer the noise.
Video Temporal
3D NR
Temporal video denoising. The higher the value, the fewer the flicker noise.
Image
Scene
You can change the scene, and adjust the sharpness of corresponding
scene. Scenes available:
Morning/Dusk
,
Day
, and
Night
.
Sharpness
You can set the sharpness of corresponding scene.
The higher the value, the clearer the image. But there will be noise if
sharpness is too high.
Loading ...
Loading ...
Loading ...