Loading ...
Loading ...
Loading ...
24
3) Click
OK
.
Step 6 Configure other OSD options.
Table 2-11 Snap OSD parameters description
Parameter Description
Insert Forward
Select one OSD option, click
Insert Forward
, and select other OSD options.
The new OSD options will be displayed before original OSD option.
Insert
Backward
Select one OSD option, click
Insert Backward
, and select other OSD options.
The new OSD option will be displayed after the original OSD option.
Modify
Click it, and all the OSD information status is displayed as
except
Line
Feed
. Click
to modify the prefix, suffix, content, and separator of
corresponding OSD option.
Delete
Click it, and all the selected OSD information status is displayed as
, click
to delete corresponding OSD option.
Clear Delete all OSD information.
Line Feed
Line feed is used to separate different information into multiple lines. For
example, information 1 before a line feed is displayed on the first line, and
information 2 after the line feed is displayed on the second line.
Step 7 Click
Save
.
2.5.1.4 Configuring Cutout
2.5.1.4.1 Snapshot Cutout
Enable plate cutout function, and the system will cut out the recognized plate picture, and save it to
the storage path.
Procedure
Step 1 Select
Setting
>
ANPR
>
Cutout Config
>
Cutout Config
.
Figure 2-28 Snapshot cutout
Step 2 Select
Enable
to enable
Plate No.
and
Vehicle Body Cutout
.
Step 3 Click
Save
.
2.5.1.4.2 Plate Overlay
You can select whether to overlap the plate image onto the snapshot, and set the overlap position
and size.
Procedure
Step 1 Select
Setting
>
ANPR
>
Cutout Config
>
Plate Overlay
.
Step 2 Configure the parameters.
Loading ...
Loading ...
Loading ...