Loading ...
Loading ...
Loading ...
27
Table 2-12 Parameter description
Parameter Description
Scheduled Barrier Always
Open
Select it, and enable the function of barrier always open. Configure
the period of barrier always open. The barrier will not close during
the defined period.
Enable Select it to enable barrier control, and configuration.
Barrier Opening Method
Triggers alarm through different modes, and remotely controls the
barrier opening and close.
●
All Vehicles Open Barrier
: When the camera captures any
vehicle, it outputs an open barrier signal.
●
Licensed Vehicles (Camera)
: When the camera captures any
plate, it outputs an open barrier signal.
●
Open barrier by allowlist
: When the camera captures vehicles
that are on the allowlist or conform to fuzzy matching, it
outputs an open barrier signal.
●
Command (Platform)
: The camera outputs an open barrier
signal when it receives a command from the platform.
●
Click
Manually open barrier
or
Manually Close
to manually
control the barrier.
You can set barrier opening control to
Open barrier by allowlist
,
and
Command (Platform)
at the same time.
Open barrier by
allowlist
takes priority.
Barrier Opening Config ●
Alarm-out Port
: Alarm linkage output port. You can select any
one of the 2 ports.
●
Duration
: The duration that the barrier opening or closing
signal lasts.
Barrier Closing
Step 3 Click
Save
.
2.5.1.6.2 Remote Controller
You can connect the camera to a remote controller, and then you can use the remote controller to
control the camera.
Procedure
Step 1 Select
Setting
>
ANPR
>
Barrier Control
>
Remote Controller
.
●
The unlock button controls the alarm-out port of NO1 COMI, and the lock button
controls the alarm-out port of NO2 COM2.
●
The relationship between unlock/lock button and alarm-out ports cannot be changed.
Loading ...
Loading ...
Loading ...