Dahua ITC413-PW4D SERIES Access ANPR Camera

Smart ANPR Camera Web Operation Manual V1.0.1 - Page 55

For ITC413-PW4D SERIES.

PDF File Manual, 81 pages, Read Online | Download pdf file

ITC413-PW4D SERIES photo
Loading ...
Loading ...
Loading ...
46
Parameter Description
Port
Port number of the outgoing mail server complying with SMTP
protocol. It is 25 by default.
Anonymity
For servers supporting anonymous email, you can log in anonymously
without entering username, password, and sender information.
Username
Username and password of the sender mailbox.
Password
Sender Email address of the sender.
Encryption Type Select encryption type from
None
,
SSL
, and
TLS
.
Subject
You can enter no more than 63 characters in English letters, and
numbers.
Receiver Email address of the receiver. Supports 3 addresses at most.
Attachment Select the checkbox to add attachments in the email.
Test Email
Test whether the email function is normal. If the configuration is
correct, the email address of the receiver will receive the test email.
Save the email configuration before running the rest.
Step 3 Click
Save
.
2.5.3.7 Configuring SNMP
Set SNMP and connect to the camera through tools such as MIB Builder and MG-SOFT MIB Browser,
and then you can manage and monitor the camera on the tool.
Prerequisites
Install a software for monitoring and managing SNMP (Simple Network Management Protocol)
device.
Get the corresponding version of MIB file from technical support.
Procedure
Step 1 Select
Setting
>
Network Settings
>
SNMP
.
Step 2 Select the version of SNMP to enable it.
V1
: The device can only process the information of version 1.
V2
: The device can only process the information of version 2.
V3
: Set the username, password and authentication type to enable safety verification
when the server accesses the device.
Step 3 Enter the IP address of the computer on which the MIB software is installed as
Trap
Address
, and leave other parameters as default.
Step 4 Click
Save
, and then you can view the device configurations through MIB software.
2.5.3.8 Configuring 802.1x
Procedure
Step 1 Select
Setting
>
Network Settings
>
802.1x
.
Step 2 Select the checkbox of
Enable
, and then configure the parameters.
Loading ...
Loading ...
Loading ...