Loading ...
Loading ...
Loading ...
6
2.1.3 Login
You can log in to the webpage by following the steps below. For first-time login or login after
restoring factory default settings, see "2.1.2 Device Initialization".
Procedure
Step 1 Enter the IP address of the camera in the browser address bar, and then press Enter.
Step 2 Enter your login username, and password, and then click
Login
.
2.1.4 Resetting Password
Reset the password when you forget or want to change it.
●
When scanning the QR code to acquire the security code, one QR code supports up to 2
acquisition.
●
The security code received through email is only valid for 24 hours.
●
One device can generate up to 10 security codes in one day, so you can change the password 10
times at most in one day.
●
Email address must be filled in during device initialization; otherwise you will not receive the
security code. The email address of admin can be modified under
Setting
>
System
>
Account
>
Account
.
Procedure
Step 1 Open the browser, enter the IP address of the camera in the browser address bar, and then
press Enter.
Step 2 Click
Forgot password?.
Figure 2-4 Information
Step 3 Click
OK
.
If you use IE browser, the system might prompt
Stop running the script
, click
No
, and
continue to run the script.
Step 4 Scan the QR code according to the page prompt, and send the scanning result to
designated email to get the security code.
Loading ...
Loading ...
Loading ...