Loading ...
Loading ...
Loading ...
28
Figure 2-33 Remote controller
Step 2 Configure
Warning Light
and
Duration
.
If
Warning Light
is selected, when you press the unlock button on the remote control, the
light on the camera will flash for the duration you configure.
Step 3 Click
Connect
, and then press the corresponding button the remote controller.
You must press the button in 10 seconds.
Step 4 (Option) To disconnect the remote controller, click
Disconnect
.
Step 5 Click
Save
.
2.5.1.7 Configuring RS-485 Settings
You can configure RS-485 serial protocol of external devices. After configuration, you can set related
parameters of the device on the web client of the camera.
Procedure
Step 1 Select
Setting
>
ANPR
>
RS-485 Settings
.
Step 2 Configure the parameters.
The camera supports multiple protocols.
●
DHRS
Figure 2-34 DHRS parameters
You can select external devices on the right side which support DHRS protocol.
●
Transparent
The third-party platform can control the RS-485 output of the camera through RS-485
transparent transmission, and then you can connect external devices.
Trigger capture through transmitting capture command. To test the RS-485 transparent
Loading ...
Loading ...
Loading ...