Loading ...
Loading ...
Loading ...
12
Table 2-6 General function option
Icons Name Description
ANPR Receive
Select the checkbox, and the camera automatically
receives vehicle snapshots, and detects event
information triggered by sources such as radar or
video detection, and displays such snapshots, and
information at the lower part of the page.
The snapshots are saved in the storage path defined
in
Setting
>
Storage
>
Destination
>
Save Path
.
Record Type
Select the format of video recordings (
dav
by
default).
Talk
Click it, and then you can communicate with people
on site through the camera.
Manual Snapshot
Click to take a snapshot when a vehicle passes.
Snapshots are saved on the storage path.
●
Enable
ANPR Receive
first.
●
To change the storage path of snapshots, go to
Setting
>
Storage
>
Destination
>
Save Path
.
Digital Zoom
Drag to select an area in the video, and then the
area will be zoomed in. Right-click anywhere on the
video, or click
to exit.
Video Recording
Click it to start recording. Click
again to stop
recording. You can set the storage path of video
recordings in
Setting
>
Storage
>
Destination
>
Save Path
.
Config (LPR)
You can draw the area of plate detection, adjust
camera’s focal length, and set applicable regions.
Procedure
Step 1 Click to configure LPR.
Figure 2-13 Config (LPR)
Loading ...
Loading ...
Loading ...