Loading ...
Loading ...
Loading ...
61
EAD10 Owner’s Manual
Message List
Reference
Message List
Message Description
Are you sure? Confirms whether or not you want to execute the specified operation.
Auto power off disabled. Appears when the [STORE] button is held down while turning on the
power informing the user that the Auto Power Off function is dis-
abled.
Backup error. Appears when writing data to the Flash ROM has failed.
If data was not be properly saved when turning off the unit, this mes-
sage appears the next time the power is turned on. After the error
message appears, the Factory Reset automatically executes.
Cancel AUX IN recording? Appears when the SOURCE button is pressed while the Recorder is
in AUX IN Recording. Press the button below “YES” to return to the
normal Recorder setting.
Canceled. Appears when the cancel operation is complete.
Can’t use RECORDER now. Cannot use the recorder because “USB To Host” is set to “audio.”
Check the “USB to Host” setting.
Completed. Appears when execution of a Scene Store, File Load/Save, Job, or
other function is complete.
Connecting USB device... Appears when connecting to a USB device.
Excessive demand for USB power. Power consumption of the USB device exceeds the specified value.
Factory Reset initializing... Appears on startup if you did a factory reset.
File already exists. A file with the same name already exists.
File not found. The selected file type was not found.
Illegal file. Appears when loading a file and the Main Unit cannot handle the tar-
get file or does not support the audio file.
Incompatible USB device. Appears when an unsupported USB device is connected to the [USB
TO DEVICE] terminal.
Invalid USB device. The USB device is faulty. Format the USB device again.
No data. Appears when the target data does not exist when using the
Recorder or using Wav-related parameters under “Job.”
No response from USB device. There is no response from the USB device.
Now importing... Appears when importing a .wav file.
Now loading... Appears when loading a file.
Now processing... Appears when executing a Scene Store or Job operation. Appears
during post-processing after canceling the File Load or File Save
operation.
Now saving... Appears when saving a file.
Now switching audio driver. Appears when the [USB TO HOST] terminal is connected to a com-
puter or other device and the following operation is performed.
When changing the “USB To Host” setting to “MIDI” or “MIDI+audio.”
When entering or exiting the Recorder screen when the "USB To
Host" setting is “auto.”
Overwrite? Appears when saving a file to the USB device and a file with the
same name already exists in the USB device.
Appears when attempting to rerun the Store User Scene operation
for the Scene previously saved.
Loading ...
Loading ...
Loading ...