Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/95369202-ead10/bg1f.png)
27
EAD10 Owner’s Manual
Setting Up the Sensor Unit
Setup Guide
About the Sensor Unit Settings
Adjust the gain and sensitivity settings for the Mic sensor and Trigger sensor built into the Sensor Unit. When you need to
adjust the gain, you can also use the Auto Setting feature.
Setting the Sensor Gain Automatically
1.
Press the [ ] (Sensor Unit) button.
The SENSOR UNIT screen appears.
Setting Up the Sensor Unit
Setting Screen display Optimal condition
MIC
(Mic gain)
The level should occasionally reach to the right and the [ ]
(Sensor Unit) button lights by striking all the instruments in
the drum set.
TRG
(Trigger gain)
The level should reach to the right when the bass drum is
struck loudly
Mic gain
Trigger gain
Press the [EXIT] but-
ton to return to the
Scene screen.
Setting Up Automatically
2.
Press the button below “AUTO” ([F3]).
3.
Strike each of the instruments in the drum set with
an 8-beat rhythm.
The setting is complete after about 10 seconds of playing the drums.
If you want to stop the Auto Setting before completion, press “STOP.”
NOTE
Detection may fail in some cases, particularly if there is background noise. When detection fails, try the Auto Setting several
times. Fine adjustments should be done manually. If the Auto setting is not successful after several attempts, adjust manually.
The setting is complete when
“AUTO” reappears.
Loading ...
Loading ...
Loading ...