Loading ...
Loading ...
Loading ...
58
EAD10 Owner’s Manual
Troubleshooting
Reference
Troubleshooting
Symptom Possible cause Solution Reference page
No sound EAD10 is not turned on Make sure that the power is turned
on.
page 25
The volume is not turned up Check the [MASTER VOLUME]
knob setting.
page 13
The cable is not properly connected
or
The cable is damaged
Make sure that the Sensor Unit and
Main Unit are properly connected
with a stereo phone cable.
page 17
Make sure the cable you are using
is in good condition.
Make sure that the Main Unit is
properly connected to headphones
or other audio equipment, such as
an amplifier and/or speakers.
Make sure that the ”A” cable is con-
nected to the [A] jacks, and the “B”
cable is connected to the [B] jacks.
The volume setting is improper. Check the [MASTER VOLUME]
knob setting.
Check the power and volume set-
tings on the external devices.
page 13
Poor volume balance
Poor volume balance between
the Mic Sound and Trigger
Sound
Adjust the Trigger Sound volume. If
it does not solve the problem, adjust
the mic gain.
page 34
page 28
Poor volume balance between
the AUX IN and your perfor-
mance
Adjust the volume on the device
connected to the [AUX IN] jack.
Adjust the [AUDIO/CLICK VOL-
UME] knob.
page 13
Poor volume balance between
the USB flash memory playback
and your performance
Adjust the [AUDIO/CLICK VOL-
UME] knob.
page 13
Cymbals sound distant or vol-
ume of some drums is low
Instruments placed far from the
Sensor Unit may sound low in vol-
ume. Check the positions of drums
and cymbals in the drum set.
page 17
The bass drum Trigger Sound
does not play
Trigger settings are improper. Try using the automatic setting to
set up the Sensor Unit.
page 27
Sensor Unit not properly attached Make sure the Sensor Unit is prop-
erly attached to the hoop.
page 17
Loading ...
Loading ...
Loading ...