Loading ...
Loading ...
Loading ...
SIGLENT
SDS1000CML+/SDS1000DL+ User Manual 35
Table 2-14 Trigger Setup function menu
Option
Setting
Explain
Coupling
DC
Passes all components of the signal
AC
Blocks DC components ，attenuates signals
below 50 Hz.
HF Reject
Attenuates the high-frequency components
above 150 kHz.
LF Reject
Blocks the DC component , attenuates the
low-frequency components below ７ kHz.
Holdoff
Using the “universal” knob to adjust holdoff
time(sec)，the holdoff value is displayed.
Holdoff
Reset
Reset holdoff time to 100ns.
Return
Return the first page of “Trigger main menu”.
Picture2.8-2
Operate Instruction:
1. Set up Type
1) Press the “TRIG MENU” button to display “Trigger” menu.
2) Press the “Type” option button to select “Edge”.
2. Set up Source
According to input signal, press the “Source” option button to select
“CH1”, “CH2”,“EXT”, “EXT/5”or “AC Line”.
3. Set up Slope
Press the “Slope” option button to select “ ”, “ ” or “ ”.
4. Set up Trigger mode
Press the “Trigger mode” option button to select “Auto”, “Normal”,
“Single”.
Loading ...
Loading ...
Loading ...