Loading ...
Loading ...
Loading ...
SIGLENT
SDS1000CML+/SDS1000DL+ User Manual 11
■ FORCE: Use the FORCE button to complete the current waveform acquisition
whether the oscilloscope detects a trigger or not. This is useful for Single
acquisitions and Normal trigger mode.
■ SAVE/RECALL: Press to display the Save/Recall menu. You can use the
Save/Recall menu to save and recall up to 20 oscilloscope setups or waveforms
in internal memory (up to 20 waveforms) or on a USB memory device (limited by
memory capacity of USB device). You can also use it to recall the default factory
settings, to save waveform data as a comma-delimited file (.CSV), and to save
or print the displayed waveform image.
■ ACQUIRE: Press to display Acquire menu. You can use the Acquire menu to
set the acquisition Sampling Mode (Sampling, Peak Detect, Average).
■ MEASURE: Press to display a menu of measurement parameters.
■ CURSORS: Display the Cursor Menu. Vertical Position controls adjust cursor
position while displaying the Cursor Menu and the cursors are activated.
Cursors remain displayed (unless the “Type” option is set to “Off”) after leaving
the Cursor Menu but are not adjustable.
■ DISPLAY: Press to open the Display menu. You can use the Display menu to
set grid and waveform display styles, and persistence.
■ UTILITY: Press to open the Utlity menu. You can use the Utility menu to
configure oscilloscope features, such as sound, language, counter, etc. You can
also view system status and update software.
■ DEFAULT SETUP: Press to reset the oscilloscope’s settings to the default
factory configuration.
■ HELP: Enter the online help system.
■ AUTO: Automatically sets the oscilloscope controls to produce a usable display
of the input signals.
■ RUN/STOP: Continuously acquires waveforms or stops the acquisition.
Note：If waveform acquisition is stopped (using the RUN/STOP or SINGLE
button), the SEC/DIV control expands or compresses the waveform.
■ SINGLE: Acquire a single waveform and then stops.
Loading ...
Loading ...
Loading ...