Loading ...
Loading ...
Loading ...
23
LIGHTS EXPLANATION OF INDICATOR
LIGHTS
OPERATION
Flashing
An attempt is being made to prepare a bev-
erage, but with water tank (A7) empty
Fill the tank with water
Because the beans are too nely
ground, the coee is delivered too
slowly or not at all
Remove the lter holder (C1) and repeat the
coee-making steps, bearing in mind the
indications given in sections “4.1 Step 1 -
Grinding” and “4.2 Step 2 - Tamping”
The coee lter (C3) or (C4) is
obstructed
Rinse the lters under running water
The tank (A7) is not properly in place
and the relative valves are not open
Press down lightly on the tank to open the
valves
Limescale in the water circuit Descale as described in section “12.
Descaling”
On
1 cup preparation is selected The entire preparation procedure (from
grinding to delivery) is set to make 1 cup
On
2 cup preparation is selected The entire preparation procedure (from
grinding to delivery) is set to make 2 cups
MIN MED MAX
On
Select one of the available
temperatures
See “Coee preparation temperature”
Flashing
General alarm Turn the machine o and wait 10 minutes
before turning on again. If the problem con-
tinues, contact customer services.
Flashing
The steam function is selected and
underway
After a few seconds, the machine starts deliv-
ering steam
On - red
Descaling is required Carry out descaling as described in section
“12. Descaling”
Flashing - On
Descaling is selected Press OK to start descaling or turn the dial to
a beverage
Flashing
Descaling proceeds. The machine deliv-
ers descaling solution
Proceed by completing the descaling cycle
(see “12. Descaling”)
→
Red
Red
Orange
Orange
Loading ...
Loading ...
Loading ...