Loading ...
Loading ...
Loading ...
22
8. Press the hold the OK button (B6) for at least 3 seconds. The
OK light ashes.
9. The descaling programme starts and the descaler liquid
comes out of the spouts. The descale programme removes
limescale deposits from inside the appliance by automati-
cally performing a series of rinses and pausesuntil the tank
is empty.
Descaling ceases and the OK light turns white. This means that a
rinse cycle must be carried out:
10. Empty the containers used to collect the descaler solution
and reposition them under the spouts.
11. Remove the water tank, empty out any residual descaler
solution, rinse under running water and ll with fresh
water up to the MAX level (g. 39). Put the tank back in
its housing.
39
MAX
13. EXPLANATION OF INDICATOR LIGHTS
LIGHTS EXPLANATION OF INDICATOR
LIGHTS
OPERATION
All lights blink briey Turning the machine on Self-diagnosis
On
The machine has been turned on for the
rst time and the water circuit must be
lled
Proceed as indicated in section “3. Setting up
the appliance”
+
-
On
(The indicators and show
the respective selections)
The machine is ready to deliver uids Set up the machine and proceed with prepa-
ration of the beverage
Flashing
The machine is warming up
Wait until the ideal delivery temperature has
been reached
On
There is not enough water in the tank (A7)
or the tank is not correctly in place
Fill the tank with water, or remove the tank
and reposition it correctly
→
12. Press the
OK button. The rinse cycle starts.
13. When rinsing is complete, delivery stops. The light
ashes red and the OK light goes out.
14. Empty the recipient used to collect the rinse water.
15. Remove and empty the drip tray (A19), then reposition it in
the machine.
16. Remove the tank, ll with fresh water and reposition in the
machine. (If present, rinse the softballs with running water
and put back in the tank).
17. Turn the function selection dial (B8) to one of the beverages.
The machine is now ready for use.
Please note:
• The descaling cycle can be started up at any time (even if
the relative light has not yet come on).
• Should descaling be started up by mistake, it can be
stopped by pressing the OK button and holding for 10 sec-
onds; the rinse cycle cannot be stopped.
Loading ...
Loading ...
Loading ...