Loading ...
Loading ...
Loading ...
Level 1 Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP APIPA
- Set the machine to allocate the IP
address from the link-local address range
automatically.
IPv6
- Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother support website at
support.brother.com.
Ethernet
- - Select the Ethernet link mode.
Wired Status
- - View the current wired status.
MAC Address
- - View the machine's MAC address.
Set to Default
- - Restore the wired network settings to the
factory settings.
Wired Enable
- - Turn the Wired LAN interface on or off
manually.
WLAN TCP/IP BOOT Method
- Select the Boot method that best suits
your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
(up to 32 characters)
WINS
Configuration
- Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary
WINS server.
Secondary
Specify the IP address of the secondary
WINS server.
DNS Server Primary
Specify the IP address of the primary
DNS server.
Secondary
Specify the IP address of the secondary
DNS server.
APIPA
- Set the machine to allocate the IP
address from the link-local address range
automatically.
IPv6
- Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother support website at
support.brother.com.
Setup Wizard
- - Configure your wireless network settings
manually.
WLAN Assistant
- - Configure your wireless network settings
using the Brother installation disc.
WPS
- - Configure your wireless network settings
using the one-button push method.
WPS w/ PIN
Code
- - Configure your wireless network settings
using WPS with a PIN.
WLAN Status Status
- View the current wireless network status.
Signal
- View the current wireless network signal
strength.
599
Loading ...
Loading ...
Loading ...