Brother MFC-L2750DW XL All-In-One Monochrome Laser Printer

User Manual - Page 464

For MFC-L2750DW XL.

PDF File Manual, 651 pages, Read Online | Download pdf file

MFC-L2750DW XL photo
Loading ...
Loading ...
Loading ...
Error Message Cause Action
Disconnected
The other person or other person's
fax machine stopped the call.
Try to send or receive again.
If calls are stopped repeatedly and
you are using a VoIP (Voice over IP)
system, try changing the Compatibility
to Basic (for VoIP).
Document Jam
The document was not inserted or fed
correctly, or the document scanned
from the ADF was too long.
Remove the jammed paper from the
ADF unit.
Clear any debris or scraps of paper
from the ADF unit paper path.
Press
.
DR Mode in Use
The machine is set to Distinctive Ring
mode. You cannot change the
Receive Mode from Manual to
another mode.
Set Distinctive Ring to Off.
Drum !
The corona wire on the drum unit
must be cleaned.
Clean the corona wire on the drum
unit.
The drum unit or the toner cartridge
and drum unit assembly is not
installed correctly.
Put the toner cartridge in the drum
unit. Then reinstall the toner cartridge
and drum unit assembly in the
machine.
Drum End Soon
The drum unit is near the end of its
life.
Order a new drum unit before you get
the Replace Drum message.
Jam 2-sided
The paper is jammed in the 2-sided
paper tray.
Pull the paper tray and the 2-sided
tray out completely, open the back
cover and then remove all jammed
paper. Close the back cover, and put
the paper tray and the 2-sided tray
firmly back in the machine.
Jam Inside
The paper is jammed inside the
machine.
Open the front cover and remove the
toner cartridge and drum unit
assembly. Pull out the jammed paper.
Close the front cover.
Jam Rear
The paper is jammed in the back of
the machine.
Open the fuser cover and remove all
jammed paper. Close the fuser cover.
If the error message remains, press
Retry.
Jam Tray
The paper is jammed in the indicated
paper tray.
Pull the paper tray out completely and
remove all jammed paper. Put the
paper tray firmly back in the machine.
Limit Exceeded
The print limit set in Secure Function
Lock 3.0 was reached.
Call your administrator to check your
Secure Function Lock Settings.
Manual Feed
Manual was selected as the paper
source in the printer driver, but there
is no paper in the manual feed slot.
Place paper in the manual feed slot.
No Caller ID
There is no incoming call history. You
did not receive calls or you have not
If you want to use the Caller ID
feature, call your telephone company.
457
Loading ...
Loading ...
Loading ...