Loading ...
Loading ...
Loading ...
Global Mode
Overrides Page
6-7
Use the FavoriteInc and FavoriteDec assignments (Favorite increment/decrement) to
select the next or previous Favorite when you depress the pedal. If you are not playing any
Favorites, FavoriteInc and FavoriteDec will select the rst Favorite, or the last Favorite that
was selected since turning on the SP6.
Use the Arp On/O and Arp Latch assignments to easily control arpeggiator functions.
e Arp On/O assignment allows you to toggle the arpeggiator on and o by pressing
a switch pedal. e Arp Latch assignment allows you to latch held notes to be played by
the arpeggiator by holding down a switch pedal. When using the Arp Latch assignment,
make sure the arpeggiator is turned on. Play the notes you wish to latch, press and hold the
assigned pedal, then release the notes. e notes will continue to arpeggiate until the pedal is
released.
In Multi Edit Mode, if a pedal is selected which has a pedal override enabled in Global
mode, Multi Edit Mode will display the original assignment with an asterisk (*) to remind
you that the Global mode pedal override settings are being used instead of the Multi mode
pedal settings.
In Multi Edit Mode, setting a Pedal assignment to “OFF” will disable the override for that
Pedal in the selected Zone. It can be useful in Multi Mode to disable the Pedal Override for
some Zones. For example, you may want to use a Pedal Override to control Sustain in all
Zones of a Multi, but disable Sustain for one Zone.
KB3 Rotary
By default KB3 organ Programs have the Slow/Fast speed control for the Rotary speaker
eect assigned to the VARIATION button and the SW1 (SUSTAIN) pedal (the
“Button+Ped” setting). Setting the KB3 Rotary parameter to “Button” allows the Sustain
pedal to function as sustain for all KB3 Programs, instead of Rotary Slow/Fast. e
VARIATION button will always control the Rotary speed, regardless of this parameter’s
setting.
Loading ...
Loading ...
Loading ...