Loading ...
Loading ...
Loading ...
Program Mode
Controllers
2-6
SW1 (SUSTAIN) and SW2 Pedals
e SW1 (SUSTAIN) pedal defaults to controlling Sustain, which will sustain any note that
is played while the pedal is pressed, for as long as the pedal is held.
e SW1 (SUSTAIN) jack is compatible with continuous switch pedals (Half-Damper) that
use a 1/4 inch tip-ring-sleeve plug (such as the Kurzweil KP-1H). When connected to the
SW1 (SUSTAIN) jack, a Half Damper pedal enables ner control of Sustain than a standard
switch pedal. Half Damper control is enabled for Programs in the Piano category. Programs
outside of the Piano category will respond to a Half Damper pedal as if it is a standard switch
pedal.
For KB3 Organ Programs, the SW1 (SUSTAIN) pedal controls the Rotary Speaker speed,
changing between fast and slow. e LCD display shows “KB3” when a KB3 Program is
selected.
e SW2 pedal defaults to controlling Sostenuto, which will sustain notes from any keys that
are being held when the pedal is pressed, for as long as the pedal is held.
Global Mode can be used to set pedal overrides, which can change the pedal assignments for
all Programs.
CC (VOLUME) Pedal
e CC (VOLUME) pedal is assigned to control Program volume (pre-FX).
For KB3 Organ Programs, the CC (VOLUME) pedal controls organ swell. Organ swell is
similar to Program volume, except volume can not be turned all the way down to silence.
e LCD display shows “KB3” when a KB3 Program is selected.
Loading ...
Loading ...
Loading ...