Loading ...
Loading ...
Loading ...
Multi Mode
SPLIT/LAYER
4-8
Follow these steps to create a Layer:
1. In Multi Mode, select a Multi that you wish to layer. e selected Multi must have at
least one ZONE ON/OFF button set to o (an inactive Zone).
2. Press the PREVIOUS and NEXT buttons simultaneously to access the “Split or Layer”
Page.
3. On the “Split or Layer” Page, use the PREVIOUS or NEXT buttons to select “Layer
<ENTER>”, then press the ENTER button.
4. On the “Layer” Page, the lowest numbered inactive Zone is selected with a default
layer Program selected for the layered Zone 2 Program. Use the ALPHA WHEEL or
CATEGORY buttons to select a dierent Program for the layered Zone 2 Program.
5. Additional Layer parameters are described in Split/Layer Parameters on page 4-8.
Use the CHANNEL/PAGE buttons to navigate between each of the 3 Layer function
pages. Use the PREVIOUS or NEXT buttons to select each parameter, and the ALPHA
WHEEL or CATEGORY buttons to change the value of each parameter.
6. Press the SAVE button to save your Layer as a Multi (See below for details on saving).
After saving your Layer Multi, you can edit additional Multi parameters in Multi Edit
mode.
Split/Layer Parameters
e following parameters are available for each of the 4 Zones. e ZONE ON/OFF
parameters are controlled by using the front panel ZONE ON/OFF buttons.
e remaining parameters are accessed on each of the pages listed below. Use the
CHANNEL/PAGE buttons to navigate between each of the 3 Layer or Split function pages.
On these pages, the left hand Zn column indicates the Zone number associated with each of
the 4 rows of parameters.
ZONE ON/OFF
While creating a Split or Layer, inactive Zones can be turned On by turning on the ZONE
ON/OFF buttons.
Loading ...
Loading ...
Loading ...