Loading ...
Loading ...
Loading ...
Multi Mode
Multi Save Dialog
4-10
2. Change the panning by using the ALPHA WHEEL, or use the keypad function of the
CATEGORY buttons to type a pan value (0-127) followed by pressing the ENTER
button.
A value of 0 is full left, 64 is center, and 127 is full right. Other values will move the stereo
placement in between these positions.
A value of “None” can also be selected, which will use the last pan value used by the Zone’s
MIDI channel. A value of “None” can be entered by using the ALPHA WHEEL to scroll
below 0.
Split Key Range Page / Layer Key Range Page
Key Low / Key High
e Key Low and Key High parameters set the playable key range of each Zone by setting
the lowest and highest playable key of each Zone. Keys played within this range will trigger a
note for the selected Zone.
Using Split sets the boundary between the left hand and right hand Zones to E3. Using
Layer sets the new Layer Zone keyboard range to C1 - G9. Change these parameters for each
Zone to create custom Split and Layer key ranges.
Values for the currently selected Key Low or Key High parameter can be selected by holding
down the ENTER button and then playing the desired key on the keyboard. Values can
also be selected by using the ALPHA WHEEL, or by using the keypad function of the
CATEGORY buttons, followed by pressing the ENTER button.
Multi Save Dialog
Press the SAVE button to save a Split or Layer Multi as a User Multi, or to save a Multi with
the current state of the ZONE ON/OFF buttons.
e current state of the VARIATION button and/or the ARP ON/OFF button is saved if
any of the Arp and/or Variation parameters are set to Yes on the Multi Edit Buttons Page. To
save changes made by using the MODULATION WHEEL or any of the Knobs, you must
set the value of each controller on the Multi Edit Mode Controllers Page.
Loading ...
Loading ...
Loading ...