Loading ...
Loading ...
Loading ...
Program Mode
Changing the MIDI Channel
2-13
Saving a User Program
To save a User Program, select the Program Save Page and press the SAVE button, (or press
the EXIT button to exit without saving). e display will show a brief message to conrm
that the Program was saved.
After successfully saving, the Program will be selected in Program Mode in the User ID range
(1025-2048). To nd the Program again later, make sure to press the USER button.
Changing the MIDI Channel
e current MIDI channel is shown on the right side of the top line of the display. Use the
CHANNEL/PAGE buttons to change the MIDI channel. Pressing both CHANNEL/PAGE
buttons simultaneously will reset the current MIDI channel to 1.
A dierent Program can be selected for each MIDI Channel. All channels can be played
simultaneously from an external MIDI sequencer or computer.
One Reverb eect is shared between Programs on all channels. e Reverb settings (such as
Reverb Time) of the Program on the currently selected MIDI Channel is used for Programs
on all Channels. Programs on each channel can adjust the amount of Reverb used by using
the REVERB knob.
e MIDI OUT and USB ports will also transmit MIDI to the selected Channel when the
keyboard is played. is is useful for playing external MIDI instruments or software on a
computer/tablet.
PANIC
Pressing the 0 and ENTER buttons simultaneously performs the PANIC function. PANIC
deactivates all sounding notes and resets controller values by sending an “All Notes O ”
message and a “Reset All Controllers” message on all 16 MIDI channels.
Loading ...
Loading ...
Loading ...