Loading ...
Loading ...
Loading ...
● Configuring the Summer Time Setting
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (D) for at least two seconds.
Release the button when
e
and start
to flash.
When a connection is established
between the watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
phone screen to select a summer time
setting.
●
“Auto”
The watch switches between standard
time and summer time automatically.
●
“OFF”
The watch always indicates standard
time.
●
“ON”
The watch always indicates summer
time.
Note
●
While the summer time setting is
“Auto”, the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch’s summer time setting as “Auto”.
●
Changing the time setting manually
with a watch operation will cancel auto
standard time/summer time switching.
●
BABY-G Connected screen shows
information about summer time
periods.
● Swapping Your World Time and Home
Time
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (D) for at least two seconds.
Release the button when
e
and start
to flash.
When a connection is established
between the watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
After swappingBefore swapping
World Time City
(New York)
World Time City
(Tokyo)
Home City (New York)Home City (Tokyo)
Note
●
Auto time adjustment does not work for
24 hours after swapping of the Home
Time and World Time.
Adjusting Hand Alignment
If the hands are out of alignment even though
auto time adjustment is being performed, use
BABY-G Connected to adjust them.
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (D) for at least two seconds.
Release the button when
e
and start
to flash.
When a connection is established
between the watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
phone screen to correct hand alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button besides (L) to terminate
the connection.
DisconnectedConnected
2.
X
Hold down (C) for at least two seconds.
This will cause the watch to enter the
Timekeeping Mode.
Operation Guide 5556
7
Loading ...
Loading ...
Loading ...